| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 12 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Work principle of Vacuum Honey Processing plant
Decrease the boiling point in the condition of high vacuum,and steam up the water in honey,and increase honey's concentration.
Main parts:
pre-heater,filter, thickener,condenser & water container,vacuum pump.
honey concentrate machine parameters
|
Model |
FM-600 |
FM-400 |
|
Production capacity |
1.2-1.5t/8h |
0.4-0.5t/8h |
|
Machine dimension |
1750*600*1660 |
1600*500*1555 |
|
Tank diameter |
600mm |
400mm |
|
Tank height |
600mm |
600mm |
|
The overall volume |
140L |
70L |
|
Effective volume |
120L |
60L |
|
Preheat tank power |
6KW |
6KW |
|
Vacuum concentration tank power |
9KW |
6KW |
A single heating tube (preheating tank is 6 kw ,and vacuum concentrator is 9 kw)
Vacuum pump SK - 0.8 voltage 380 v power 1.5 KW
: preheating tank motor slowdown micromotor voltage 220v power 180w ratio 25 60r/min
Production capacity: 0.5 to 1.5 t per day
Concentrated temperature: 55 ºC or less
Vacuum: -0.092 Mpa or less
The maximum total power: 16Kw
Introduction of Vacuum honey processing plant:
Currently, honey processing main used mechanical filters and low-temperature vacuum concentrated to remove impurities and excess water, Get a higher degree of vacuum systems and the reasonable structure of the low temperature evaporation device is the key to the processing technology of bee products. This equipment has fully realized honey enrichment process special requirements, and to meet the aspirations of bee products processing enterprises.
Process of honey processing equipment:
The original honey → coarse filtration → Agitation, preheating → sterilization, melt crystallization nucleation → Fine filtration → low temperature, concentrated → filling
Photos of Vacuum Honey Processing Machine / Equipment
){kind=link}